热门文档
- 2024-01-19 21:03:34 GB 15558.2-2005
- 2024-01-31 21:34:39 DB11 367-2006 地下室防水施工技术规程
- 2024-01-19 21:03:34 GB 12514.2-2006 消防接口 第2部分内扣式消防接口型式和基本参数
- 2024-01-31 21:34:39 DB11 971-2013 重点建设工程施工现场治安防范系统规范
- 2024-02-29 16:45:21 DB33∕T 1137-2017 建筑反射隔热涂料应用技术规程
- 2024-01-27 16:07:00 JG∕T 5115-1999 钢筋网成型机
- 2024-01-18 16:14:29 DB∕T 29-240-2016 天津市保温装饰板外墙外保温系统技术规程
- 2024-02-29 20:00:40 DB34∕T 2463-2015 公路工程混凝土抗压强度检测技术规程 超声回弹综合法
- 2024-01-19 21:03:34 GB 11949-1989 陶瓷砖釉面抗龟裂试验方法
- 2024-02-28 23:22:33 DB22∕T 3430-2023 公路建设项目水土保持技术规范
- 2024-01-31 19:55:33 GB 18588-2001混凝土外加剂中释放氨的限量
- 2024-01-27 17:25:47 T∕CBCSA 30-2020 陶瓷砖试验方法 抗热震性的测定
![](source/plugin/keke_doc/template/images/loading.gif)
以下内容来自OCR识别,不保证本文准确性。完整文件请预览PDF
BSI BS*608981■1624669001b2622■BS6089:1981UDC624.012.3/.4j.046:691.32:620.17
●Guide to Assessment of concrete strength in existing structures
Guide pour l'évaluation de la resistance du beton dans les constructions existantes
Leitfaden fur die Beurteilung der Betonfestigkeit in vorhandenen Bauwerken
British Standards Institution
Copyright by the British Standards Institution
Mon Jul2414:34:472000
BSI BS:*608981■162466900162634■BS6089:1981
Contents
Page
Page
Foreword
Inside front cover
Tables
Cooperating organizations
Back cover
- Guide to tests for assessing aspects of concrete strength
- Relative merits and limitations of various tests
1.Scope
1
2.References
3.Definitions
Figures
- Illustration of approximate relationship
Test methods
- Conducting an investigation
- Comparisons between design strength and estimated in-situ cube strength
Appendix
A.Bibliography
Foreword
The need to assess the strength of the concrete in an selection of the method and testing programme most existing structure can arise from a variety of reasons, appropriate to the circumstances that prevail. Such as doubts following non-compliance of standard the interpretation of the test results and the factors that cube strength results or possible deterioration due to influence the relationship between the standard cube aggressive environments or a wish to check that the strength and the strength of the concrete in the structure strength is acceptable for a particular loading system, are also discussed.
The recommendations in this standard are intended to the drilling and testing of cores has been common provide guidance only; they are not intended to supplant practice for many years and several non-destructive engineering judgment or to inhibit the development and tests have been available, well established test methods use of other test methods. being described in BS 1881 and BS 4408.
Numbers in parentheses in the text of the standard refer This guide presents information on the standard method to the numbered references given in appendix A.
Copyright by the British Standards Institution
Mon Jul2414:34:562000
```
请如实的对该文档进行评分-
-
-
-
-
0 分