热门文档
- 2024-01-19 21:03:34 GB 15558.2-2005
- 2024-01-31 21:34:39 DB11 367-2006 地下室防水施工技术规程
- 2024-01-19 21:03:34 GB 12514.2-2006 消防接口 第2部分内扣式消防接口型式和基本参数
- 2024-01-31 21:34:39 DB11 971-2013 重点建设工程施工现场治安防范系统规范
- 2024-02-29 16:45:21 DB33∕T 1137-2017 建筑反射隔热涂料应用技术规程
- 2024-01-27 16:07:00 JG∕T 5115-1999 钢筋网成型机
- 2024-01-18 16:14:29 DB∕T 29-240-2016 天津市保温装饰板外墙外保温系统技术规程
- 2024-02-29 20:00:40 DB34∕T 2463-2015 公路工程混凝土抗压强度检测技术规程 超声回弹综合法
- 2024-01-19 21:03:34 GB 11949-1989 陶瓷砖釉面抗龟裂试验方法
- 2024-02-28 23:22:33 DB22∕T 3430-2023 公路建设项目水土保持技术规范
- 2024-01-31 19:55:33 GB 18588-2001混凝土外加剂中释放氨的限量
- 2024-01-27 17:25:47 T∕CBCSA 30-2020 陶瓷砖试验方法 抗热震性的测定
![](source/plugin/keke_doc/template/images/loading.gif)
以下内容来自OCR识别,不保证本文准确性。完整文件请预览PDF
DRAFT FOR DEVELOPMENTDD CEN/TS1992-4-3:2009 Design of fastenings for use in concrete Part 4-3: Anchor channels
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
British Standards DD CEN/TS1992-4-3:2009
National Foreword
This Draft for Development is the UK implementation of CEN/TS1992-4-3:2009. This publication is not to be regarded as a British Standard. It is being issued in the Draft for Development series of publications and is of a provisional nature. It should be applied on this provisional basis, so that information and experience of its practical application can be obtained. Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the international organization responsible for its conversion to an international standard. A review of this publication will be initiated not later than 3 years after its publication by the international organization so that a decision can be taken on its status. Notification of the start of the review period will be made in an announcement in the appropriate issue of Update Standards. According to the replies received by the end of the review period, the responsible BSI Committee will decide whether to support the conversion into an international Standard, to extend the life of the Technical Specification or to withdraw it. Comments should be sent to the Secretary of the responsible BSI Technical Committee at British Standards House, 389 Chiswick High Road, London W4 4AL. The UK participation in its preparation was entrusted to Technical Committee B/525/2, Structural use of concrete. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.
Amendments/corrigenda issued since publication
was published under the authority of the Standards Policy and Strategy Date Comments Committee on 30 June 2009. ISBN 9780580626371
请如实的对该文档进行评分-
-
-
-
-
0 分