以下内容来自OCR识别，不保证本文准确性。完整文件请预览PDF

BRITISH STANDARD

BS EN 1015-12:2000

Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates

The European Standard EN 1015-12:2000 has the status of a British Standard

ICS 91.080.30, 91.100.10

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

BS EN 1015-12:2000

National foreword

This British Standard is the official English language version of EN 1015-12:2000, which is included in a package of new European Standards being prepared by CEN/TC 125 relating to rendering and plastering mortars for masonry. Although the English text versions of these European Standards will be adopted as British Standards as they become available, the existing British Standard will be retained but only until such time that the complete package of European Standards becomes available.

Any residue(s) from British Standards affected by the package which need to be retained will be drawn together to form a new BS. The original group of British Standards will then be withdrawn and this will be notified in Standards. The UK participation in its preparation was entrusted by Technical Committee B/519, Masonry and associated tests, to Subcommittee B/519/2, Mortar, which has the responsibility to:

• aid enquirers to understand the text;
• present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
• monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references referred to in this document may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

Summary of pages

This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard, having Amendments issued since publication, been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 June 2000.

ISBN 0580348903