热门文档
- 2024-01-19 21:03:34 GB 15558.2-2005
- 2024-01-31 21:34:39 DB11 367-2006 地下室防水施工技术规程
- 2024-01-19 21:03:34 GB 12514.2-2006 消防接口 第2部分内扣式消防接口型式和基本参数
- 2024-01-31 21:34:39 DB11 971-2013 重点建设工程施工现场治安防范系统规范
- 2024-02-29 16:45:21 DB33∕T 1137-2017 建筑反射隔热涂料应用技术规程
- 2024-01-27 16:07:00 JG∕T 5115-1999 钢筋网成型机
- 2024-02-29 20:00:40 DB34∕T 2463-2015 公路工程混凝土抗压强度检测技术规程 超声回弹综合法
- 2024-01-18 16:14:29 DB∕T 29-240-2016 天津市保温装饰板外墙外保温系统技术规程
- 2024-01-19 21:03:34 GB 11949-1989 陶瓷砖釉面抗龟裂试验方法
- 2024-02-28 23:22:33 DB22∕T 3430-2023 公路建设项目水土保持技术规范
- 2024-01-31 19:55:33 GB 18588-2001混凝土外加剂中释放氨的限量
- 2024-01-27 17:25:47 T∕CBCSA 30-2020 陶瓷砖试验方法 抗热震性的测定
以下内容来自OCR识别,不保证本文准确性。完整文件请预览PDF
BRITISH STANDARD
BS EN 12020-2:2001
Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063-Part 2: Tolerances on dimensions and form
The European Standard EN 12020-2:2001 has the status of a British Standard
1Cs77.150.10
BS EN 12020-2:2001 National foreword
This British Standard is the official English language version of EN 12020-2:2001. Together with the standards listed in the following table, it supersedes BS 1474:1987 which is withdrawn. This part of BS EN 12020 is published together with:
- BS EN 755-9, Aluminium and aluminium alloys-Extruded rod/bar, tube and profiles-Part 9: Profiles, tolerances on dimensions and form;
- BS EN 12020-1, Aluminium and aluminium alloys-Extruded precision profiles in alloys EN AW-6060 and EN AW-6063-Part 1: Technical conditions for inspection and delivery
The following table gives the full list of implemented European Standards which
- Superseded British Standards
- Superseding European Standards
BS 1474:1987 | BS EN 515:1993, BS EN 573-3:1995, BS EN 573-4:1995, BS EN 755-1:1997, BS EN 755-2:1997, BS EN 755-3:1996 BS EN 755-4:1996, BS EN 755-5:1996, BS EN 755-6:1996, BS EN 755-7:1998, BS EN 755-8:1998, BS EN 755-9:2001, BS EN 12020-1:2001, BS EN 12020-2:2001 |
The UK participation in its preparation was entrusted by Technical Committee NFE/35 Light metals and their alloys, to Subcommittee NFE/35/5, Wrought aluminium and aluminium alloys, which has the responsibility to:
- aid enquirers to understand the text;
- present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
- monitor related international and European developments and promulgate them in the UK.
A list of organizations represented on this subcommittee can be obtained on request to its secretary.
Cross-references
The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Find" facility of the BSI Standards Electronic Catalogue.
A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.
This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 2001.
The BSI copyright date displayed in this document indicates when the document was last issued.
Amendments issued since publication
Amd No. Date Comments BSI 06-2001 ISBN 0580370445
```
请如实的对该文档进行评分-
-
-
-
-
0 分