BS EN 1015-3-1999 Methods of test for mortar for masonry - Determination of consistence of fresh mor

BRITISH STANDARD BS EN 1015-3:1999 Incorporating Amendment No. I

Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

The European Standard EN 1015-3:1999, with the incorporation of amendment A1:2004 has the status of a British Standard ICS 91.100.10

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

British Standards BSEN 1015-3:1999

National foreword

This British Standard is the official English language version of EN 1015-3:1999, including amendment A1:2004. It is included in a package of standards related to mortar for masonry declared by CEN/TC 125. The package of standards will supersede BS 4551-1:1998, which will be withdrawn on 30 September 2000 if all the European Standards included in the package are available.

The UK participation in its preparation was entrusted by Technical Committee B/519, Masonry and associated testing, to Subcommittee B/519/2, Mortar, which has the responsibility to:

aid enquirers to understand the text;
present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this subcommittee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BS Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

Summary of pages

This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was Amendments issued since publication published under the authority of the Standards Committee iN0 and comes into effect on Amd. No. Date Comments.