BRITISH STANDARD BS6206:1981(Reprinted, Amendments Nos. 1, 2, 3, 4 and 5)
Specification for Impact performance requirements for flat safety glass and safety plastics for use in buildings
UDC 698.3666.155 + 666.181 + 678-419:620.178.7
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
BS6206:1981 Cooperating organizations
The Elements and Components (of Diverse Materials) for Buildings Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following:
- Agrement Board
- Glass and Glazing Federation*
- Aluminium Federation
- Health and Safety Executive*
- Asbestos Cement Manufacturers' Association
- Incorporated Association of Architects and Limited Surveyors*
- Association of British Roofing Felt
- Institute of Building Control Manufacturers
- Institute of Quality Assurance
- Brick Development Association
- Institution of Municipal Engineers*
- British Ceramic Research Association
- Institution of Structural Engineers
- British Hardware Federation
- Mastic Asphalt Council and Employers'
- British Plastics Federation*
- Federation British Precast Concrete Federation Ltd.
- National Council of Building Materials
- British Steel Industry Producers
- British Woodworking Federation*
- National Federation of Building Trades
- Consumer Standards Advisory Committee of Employers BSI*
- National Federation of Roofing Contractors
- Convention of Scottish Local Authorities
- Royal Institute of British Architects*
- Royal Institution of Chartered Surveyors*
- Research Establishment, Princes Society of Chemical Industry Risborough Laboratory Timber Research and Development Association and Construction*
- Trades Union Congress Flat Glass Manufacturers' Association*
The organizations marked with an asterisk in the above list, together with the following, were directly represented on the Technical Committee entrusted with the preparation of this British Standard:
- Aluminium Window Association
- Greater London Council
- Architectural Aluminium Association
- Metal Window Federation of Great Britain
- Chief and Assistant Chief Fire Officers' Association
- National Association of Shopfitters
- National House-building Council
- Child Accident Prevention Committee
- Patent Glazing Conference
- Department of the Environment (Building Sealant Manufacturers' Conference Research Establishment)
- Union of Construction Allied Trades and Department of Trade (Metrology. Quality Technicians Assurance, Safety and Standards Division)
This British Standard, having been prepared under the direction of the Elements and Components (of Diverse Materials) for Buildings Standards Committee, was published under the authority of the Board of BSI and comes into effect on
Amd. No. |
Date of issue |
Comments |
30 November 1981 |
458 |
June 1984 |
518 |
August 1986 |
The following BSI references relate to the work on this standard: |
7589 |
May 1993 |
Committee reference ECB/4 Draft for comment 76/51653 DC 8156 |
8693 |
April 1994 |
|
Indicated by a sideline in the margin |
July 1995 |
ISBN 0580124479 [error] Page 3-282111-url format illegal |
```
本文链接:/guifan/579.html
版权声明:站内所有文章皆来自网络转载,只供模板演示使用,并无任何其它意义!